Our Comprehensive List of GD&T Symbols.
We conveniently grouped the GD&T Symbols into various categories according to when each is used in. Be sure to click on the links to get more information on each GD&T symbol or concept. We will be adding to this list periodically as we continue to build up our content.
True Position
Position is one of the most useful and most complex of all the symbols in GD&T. The two methods of using Position discussed on this page will be RFS or Regardless of Feature Size and under a material condition (Maximum Material Condition or Least Material Condition). Position is always used with a feature of size.
Learn this Symbol
Regardless of Feature Size
Symbol:None – Always Implied default condition (abbreviated: RFS) Category: Feature of Size Definition: Regardless of Feature Size (RFS) is the default conditionof all geometric tolerancesbyrule #2 of GD&T and requires no callout. Regardless of feature size simply means that whatever GD&T callout you make, is controlled independently of the size dimension of the part. This...
Learn this Symbol
Least Material Condition (LMC)
Symbol: Category: Feature of Size Definition: Least material condition is a feature of size symbol that describes a dimensional or size condition where the least amount of material (volume/size) exists within its dimensional tolerance.The callout also overridesGD&T Rule#2or the Regardless of Feature Size rule. For simplicity: If it is a hole or internal feature: LMC...
Learn this Symbol
Maximum Material Condition (MMC)
Symbol: Category: Feature of Size Definition: Maximum Material Condition or for short, MMC, is a feature of size symbol that describes the condition of a feature or part where the maximum amount of material (volume/size) exists within its dimensional tolerance. The callout also removes GD&T Rule#2 which states that all geometry tolerances are controlled independently...
Learn this Symbol
Symbol: Definition: A datum is theoretical exact plane, axis or point location that GD&T or dimensional tolerances are referenced to. You can think of themas an anchor for the entire part; where the other features are referenced from. A datum feature is usually an important functional feature that needs to be controlled during measurement as...
Learn this Symbol
Perpendicularity
Special Note: Perpendicularity in GD&T can mean two very different things depending on which reference feature is called out. The normal form or Surface Perpendicularity is a tolerance that controls Perpendicularity between two 90° surfaces, or features. Surface Perpendicularity is controlled with two parallel planes acting as its tolerance zone. Axis Perpendicularity is a tolerance...
Learn this Symbol
Total Runout
GD&T Symbol: Relative to Datum: Yes MMC or LMC applicable: No Drawing Callout: Description: Total Runout is how much one entire feature or surface varies with respect to a datum when the part is rotated 360° around the datum axis. Total runout controls both the amount of variation in the surface as the part is...
Learn this Symbol
Flatness
GD&T Flatness is a common symbol that references how flat a surface is regardless of any other datum’s or features. It comes in useful if a feature is to be defined on a drawing that needs to be uniformly flat without tightening any other dimensions on the drawing. The flatness tolerance references two parallel planes (parallel to the surface that it is called out on) that define a zone where the entire reference surface must lie.
Learn this Symbol
Symmetry
GD&T Symbol: Relative to Datum: Yes MMC or LMC applicable: No Drawing Callout: Description: GD&T Symmetry is a 3-Dimensional tolerance that is used to ensure that two features on a partare uniform across a datum plane. An established “true” central plane is established from the datum and for the symmetry to be in tolerance,...
Learn this Symbol
Straightness
Special Note: Straightness actually has two very different functions in GD&T depending on how it is called out. In its normal form or Surface Straightness, is a tolerance that controls the form of a line somewhere on the surface or the feature. Axis Straightness is a tolerance that controls how much curve is allowed in...
Learn this Symbol
Angularity
GD&T Symbol: Relative to Datum: Yes MMC or LMC applicable: Yes (Uncommon) Drawing Callout: Description: Angularity is the symbol that describes the specific orientation of one feature to another at a referenced angle. It can reference a 2D line referenced to another 2D element, but more commonly it relates the orientation of one surface plane...
Learn this Symbol
Feature Control Frame
Example Frame: Definition: In GD&T, a feature control frame is required to describe the conditions and tolerances of a geometric control on a part’s feature. The feature control frame consists of four pieces of information: GD&T symbol or control symbol Tolerance zone type and dimensions Tolerance zone modifiers: features of size, projections… Datum references (if...
Learn this Symbol
Concentricity
GD&T Symbol: Relative to Datum: Yes MMC or LMC applicable: No Drawing Callout: Description: Concentricity, sometimes called coaxially, is a tolerance that controls the central axis of the referenced feature, to a datum axis. The axes for the datum and referenced feature are derived from the median points of the part or feature. Concentricity is...
Learn this Symbol
Runout
GD&T Symbol: Relative to Datum: Yes MMC or LMC applicable: No Drawing Callout: Description: Runout is how much one given reference feature or features vary with respect to another datum when the part is rotated 360° around the datum axis. It is essentially a control of a circular feature, and how much variation it has...
Learn this Symbol
Profile of a Surface
GD&T Symbol: Relative to Datum: Optional MMC or LMC applicable: No Drawing Callout: Description: Profile of a surface describes a 3-Dimensional tolerance zone around a surface, usually which is an advanced curve or shape. If it is called out on a curved surface, like a fillet on a welded part, the entire surface where the...
Learn this Symbol
Cylindricity
GD&T Symbol: Relative to Datum: No MMC or LMC applicable: No Drawing Callout: Description: The Cylindricity symbol is used to describe how close an object conforms to a true cylinder. Cylindricity is a 3-Dimensional tolerance that controls the overall form of a cylindrical feature to ensure that it is round enough and straight enough along...
Learn this Symbol
Circularity
GD&T Symbol: Relative to Datum: No MMC or LMC applicable: No Drawing Callout: Description: The circularity symbol is used to describe how close an object should be to a true circle. Sometimes called roundness, circularity is a 2-Dimensional tolerance that controls the overall form of a circle ensuring it is not too oblong, square, or...
Learn this Symbol
Profile of a Line
GD&T Symbol: Relative to Datum: Optional MMC or LMC applicable: No Drawing Callout: Description: Profile of a line describes a tolerance zone around any line in any feature, usually of a curved shape. Profile of a line is a 2-Dimensional tolerance range that can be applied to any linear tolerance. If it is called out...
Learn this Symbol
Parallelism
Special Note: Parallelism actually has two different functions in GD&T depending which reference feature is called out. The normal form or Surface Parallelism is a tolerance that controls parallelism between two surfaces or features. The surface formis controlled similar to flatness with two parallel planes acting as its tolerance zone. Axis Parallelism is a tolerance...
Learn this Symbol
